Jaw crusher
In order to meet the current economic development Crusher equipment According to the requirements of technical level, all jaw crusher manufacturers are constantly exploring and advancing. A large number of high-end technology content crushing equipment is put into production according to the systematic model. Taicheng mining machine is mainly based on the superior performance of crusher equipment, easy operation and reliable quality. In the similar crusher equipment, the energy consumption is low and the operation and management cost is low. In addition, the load factor of the equipment, the particle size of the processed products and the change of gradation are also important assessment criteria for crushers. It is composed of jaw crusher and various crushers sand production line According to the customer's specification, use and output of stone, we can freely determine to provide customers with good configuration.
Jaw crusher appeared in 1858, is an ancient crushing equipment, also known as alligator crusher, but because of its simple structure, reliable work, easy manufacturing, easy maintenance and other advantages, so far widely used in metallurgical mines, building materials, chemical and railway, in coal processing can be used as coal crusher.
?
Working principle of jaw crusher:
The working part of jaw crusher is two jaw plates. One is fixed jaw plate (fixed jaw), which is vertically (or slightly outward inclined) fixed on the front wall of the machine body, and the other is to cover the movable jaw plate (moving jaw), which is inclined to form a crushing cavity (working chamber) with the fixed jaw plate. The occlusive jaw plate makes periodic reciprocating motion against the fixed jaw plate, sometimes separating and sometimes approaching. When separated, the material enters into the crushing chamber, and the finished product is discharged from the lower part. When I is close to it, the material between the two jaw plates is crushed by extrusion, bending and splitting.
When working, the motor drives the eccentric shaft to rotate through the belt pulley, which makes the moving jaw close to and leave the fixed jaw periodically, so as to crush, rub and grind the materials, so that the materials change from large to small, and gradually drop until discharged from the discharge port.
Vulnerable parts of jaw crusher:
Material of jaw plate
The service life of high manganese steel is 4 months;
The fixed jaw plate is made of high manganese steel, with a service life of 4 months; the front thrust plate is made of cast iron, with a service life of 2 months; and the thrust plate seat is made of material
The service life of carbon steel is 10 months; the service life of bearing bush of eccentric shaft bearing is Babbitt alloy, which is 24 months; the service life of bearing bush at eccentric shaft is Babbitt alloy, the service life is 36 months; the service life of spring steel is 6 months; the service life of bearing Bush of movable jaw spindle bearing is 12 months.
Main technical parameters of jaw type:
?
model |
Feed port size( mm ) |
Large feed size( mm ) |
Adjustment range of discharge port( mm ) |
processing capacity ( t/h ) |
Motor power ( kw ) |
weight ( t ) |
Dimensions (mm) |
PE150×250 |
150×250 |
one hundred and twenty-five |
10-40 |
1-3 |
five point five |
zero point eight |
720×660×850 |
PE200×300 |
200×300 |
one hundred and eighty |
15-50 |
2-6 |
seven point five |
one point two |
910×750×990 |
PE250×400 |
250×400 |
two hundred and ten |
20-60 |
5-20 |
fifteen |
two point eight |
1300×1090×1270 |
PE400×600 |
400×600 |
three hundred and forty |
40-100 |
16-60 |
thirty |
seven |
1730×1730×1630 |
PE500×750 |
500×750 |
four hundred and twenty-five |
50-100 |
40-110 |
fifty-five |
twelve |
1980×2080×1870 |
PE600×900 |
600×900 |
five hundred |
65-160 |
50-180 |
seventy-five |
seventeen |
2190×2206×2300 |
PE750×1060 |
750×1060 |
six hundred and thirty |
80-140 |
110-320 |
ninety |
twenty-nine |
2660×2430×2800 |
PE900×1200 |
900×1200 |
seven hundred and fifty |
95-165 |
220-450 |
one hundred and ten |
fifty-eight |
3380×2870×3330 |
PE1000×1200 |
1000×1200 |
eight hundred and fifty |
195-265 |
315-500 |
one hundred and sixty |
sixty-nine |
3480×2876×3330 |
PE1200×1500 |
1200×1500 |
one thousand and twenty |
150-300 |
400-800 |
two hundred and twenty |
one hundred point nine |
4200×3300×3500 |
PEX150×750 |
150×750 |
one hundred and twenty |
18-48 |
8-25 |
fifteen |
three point eight |
1200×1530×1060 |
PEX250×750 |
250×750 |
two hundred and ten |
25-60 |
15-35 |
thirty |
five point five |
1380×1750×1540 |
PEX250×1000 |
250×1000 |
two hundred and ten |
25-60 |
16-52 |
thirty |
seven |
1560×1950×1390 |
PEX250×1200 |
250×1200 |
two hundred and ten |
25-60 |
20-61 |
thirty-seven |
nine point seven |
2140×1660×1500 |
PEX300×1300 |
300×1300 |
two hundred and fifty |
20-90 |
20-105 |
fifty-five |
fifteen point six |
2720×1950×1600 |
With sincere service spirit, excellent quality assurance and rich experience, Taicheng Mining Machinery Co., Ltd. is especially good at the site design, planning and installation production of stone production line and gravel production line. It has won the trust of the quarry customers and has successively undertaken various supporting schemes and facilities for large, medium and small projects. Taicheng mining machinery comprehensively improves the quality of its products. The main parts and wearing parts are made of high-quality wear-resistant materials, which meet the same quality standards in Europe and America. The products are exported to Europe, America, Australia, Africa and other countries. We hope to cooperate with you and more domestic and foreign purchasing companies to advance hand in hand.
Jaw crusher 、 Price of Hubei crusher Tel: 0371-85220558
Related products
Related news · System analysis of limestone crushing production line [2015-01-22] · Crushing and screening equipment coordination in gravel production line [2014-12-31] · Operation and maintenance of jaw crusher [2014-12-26] · Environmental protection of stone crushing production line [2014-12-24] · Application of jaw crusher in tungsten mine [2014-12-23]